当前位置:首页 >> IT/计算机 >>

英文缩写,全称


abbreviation (缩写) abbreviate from (来源) 来源) 缩写)
ABAP ABC AI AIT ALT AML AMPL Advanced Business Application Programming 高级商务应用程序 Activities Based Costing 基于成本的活动 Automatic insertion 自动插入 Automated Inspection Technology 自动检查技术 Accelerated life test 加速老化试验 Approved Manufacturer Lists 批准的制造商列表 Approved Manufacturers Parts Lists 批准的制造商元件列表 Analysis of Variance 方差分析法 Automatic Optical Inspection 自动光学检查 American Production and Inventory Control Society 美国产品和投资控制协会 Advanced Product Quality Planning and Control Plan 产品质量先期策划和控制计划 Advanced Planning System 高级计划系统 As soon as possible 尽快 Available to Promise Approved Vendor List 批准的供应商列表 Ball Grid Array 球形栅格阵列 Bill Of Materials 物料清单 Bill of Material 物料清单 Boards per hour 每小时生产板数 Business Process Procedure 商务处理流程 Bottom Side Quality Control Board System Test 板子系统测试 Business Unit Co-ordinator 商务协调员 Business Unit Director 商务总监 Business Unit Manager 商务经理 Corrective Action Committee 纠正行动委员会 Computer Aided Design 计算机辅助设计

ANOVA AOI APICS APQP

APS

ASAP ATP AVL BGA BOM BOM BPH BPP BSQC BST BUC BUD BUM CAC CAD

CAE CAM CAP CAR

Computer Aided Engineering 计算机辅助工程 Computer Aided Manufacture 计算机辅助制造 Corrective action plan 矫正计划 Corrective Action Report 纠正动作报告 Chemical Abstract Service Corrective Action Team 纠正动作小组 Contract Electronics Manufacturing 合约电子制造商 Cost & Freight Cost, Insurance & Freight Carriage and Insurance Paid To Computer Integrated Quality 计算机集成质量 Computer Integrated Quality System      计 算机集成质量系统

CAS CAT CEM CFR CIF CIP CIQ CIQS

CIS

Customer Information System         客 户信息系统

CM COB

Contract Manufacturing 合同制造 Chip on Board 在板贴片元件

COB COC CofC Component Identification – can vary with the customer (e.g. Quantum uses E for integrated circuits) COSHH CPIM Cpk CPT CRD

Close of Business Certificate of compliance 资质证明 Certificate of Compliance/Conformity

Control of Substances Hazardous to Health Certified in Production and Inventory Management Capability for stable process 稳定过程的能力指数 Carriage Paid To Component Reference Designators 元件参考序号 Capacity Requirements Planning Component review report 承认书

CRP

CRR

CRT CSR CTB

Cathode Ray Tube 阴极射线管 Customer Service Representative Clean To Build report

CTS

Clean To Start

CWA D/S D/W DAF DBW DBWM DC DCN DDP DDU DE DEQ DES DF DFM

Contract Works Authorization Direct Sale Direct Withdrawal Delivered at Frontier Drive By Wire Drive By Wire Metrics Distribution Center Design change notice 设计更改通知 Delivered Duty Paid Delivered Duty Unpaid Design Engineer 设计工程师 Delivered Ex Quay Delivered Ex Ship Direct Fulfillment 直接执行 Design For Manufacture 基于制造的设计

DFMEA DFP

Design Failure Mode and Effects Analysis 设计失效模式及后果分析 Design For Procurement 基于采购的设计 Design For Test 基于测试的设计 Design for Excellence/Anything 卓越设计

DFT DFX

DGR DL DLT DOA

Daily Going Rate Direct Labor 直接劳动力

Dead on Arrival

DOE

Design of Experiment 试验设计

DOH DPM

Days On Hand Defects Per Million 百万缺陷数 Defects per Million Opportunities 百万机会缺陷数

DPMO

DR

Dynamic Replenishment 动态供应 Dynamic Replenishment Model Dock to Stock

DRM DTS

ECN

Engineering Change Notification 工程更改通知

ECN ECO ED EDI

Engineering change notice Engineering Change Order 程更改要求 Electrically Defective 电子缺陷 Electronic Data Interchange



EDM EDS

Electronic Document Management 电子文档管理 Engineering Data Services

EE EEO EFF

Equipment Engineering 设备工程部 Equal Employment Opportunity Efficiency 效率

EFTS EMC EMI EOL ERP ERS

Electronic Funds Transfer Electro-magnetic Compatibility 电磁兼容性 Electro-magnetic Interference 电磁干扰 End of Life 产品生命结束 Enterprise Resource Planning 企业资源计划 Evaluated Receipt Settlement

ESD

Electro-static Discharge 静电释放

ESDS ESS

Electro-static Discharge Sensitive Environmental Stress Screening 环境强度试验

ETA EXW FA FAB FAI FAI FAS FCA FCD FEDI FGI

Estimated Time of Arrival 预计到达 EX Works Final Assembly or Field Analysis 最终装配或者现场分析 Bare board Final Article Inspection First article inspection Free Alongside Ship Free Carrier Factory Complete Date Financial Electronic Data Interchange Finished Goods Inventory

FIFO FIN FM FMEA FOB FPY

First in First out 先进先出 Final Inspection 最终检查 Functional Manager 功能经理 Failure Mode Effect Analysis 潜在失效模式分析 Free On Board First Pass Yield 一次合格率

FQC FSR FST FTP FVT GMP GR&R

Final Quality Control 最终质量控制 Field Service Return Functional System Test 功能系统测试 File Transfer Protocol 文件传输协议 Functional Verification Test 功能交验测试 Good Manufacturing Practices Gage Repeatability and Reproducibility 量具的重复性和再现性

GRN

Goods Received Note or General Reference No.

GSM

General Surface Mount 通用表面贴 Highly Accelerated Stress Screening 高加速强度试验 Manufacturer’s part number in SAP Highly Marketable Part

HASS HERS HMP

HMU HR HSE HSP

Hot Mock Up Human Resources 人力资源 Health and Safety Executive High Speed Placement 高速贴片

I & MR IA IC

Individual and Moving Range Chart Inventory Analyst 投资分析 Integrated Circuit 集成电路

ICT

In Circuit Test 在线测试 Industry Engineering 工业工程 Indirect Labor 间接劳动力 Integrated Manufacturing Production Control Investors in People Institute of Interconnecting and Packaging Electronic Circuits 电子电路连接与包装协会 Incoming Quality Assurance 来料质量保证 International Standards Organization 国际标准化组织 Information Technology 信息技术 Just In Time 及时交货 Local Area Network 局域网

IE IL IMPCON IP IPC

IQA ISO IT JIT

LAN

LCL LIFO

Lower Control Limit 下控制限 Last in First Out 后进先出 Lower Specification Limit 工程规范下限 machine 机器 Manufacturing Defect Analysis 制造缺陷分析 Manufacturing Engineering 制造工程 Metal Electrode Face

LSL M/C MDA ME MELF

MESS MET MFG

Material Excess and Shortage Status Manufacturing Engineering Technician 制造工程技术员 Manufacturing 制造部 Melt flow index 熔融流动指数 Monthly First Pass Yield 每月一次合格率 Management Information System 管理信息系统 Manager in Training Minimum Order Quantity 最小定单数量 Screen printer manufacturer 丝网印刷制造商 Master Production Schedule 主生产计划 Materials Quotations Analyst Materials Review Board 物料评论板

MFI MFPY MIS MIT MOQ MPM MPS MQA MRB

MRO MRP

Maintenance, Repair, and Operating supplies 维护,修理及运作供应 Materials Requirements Planning 材料需求计划

MSA MSDS MTBF MTD

Measure System Analysis 测量系统分析 Material Safety Data Sheet Mean Time Between Failures 平均无故障时间 Month to Date

NDF NPF NPI NRE

Non-Defined Fail 非定义失败 No Problem Found 没有问题发现 New Product Introduction 新产品导入 Non Recurring Expense 客户提供费用 Out of Box Audit 开箱检查

OBA

OEM ORT OSHA OT OTD OTOR

Original Equipment Manufacturer 原始装备制造商 On-going Reliability Test Occupational Safety and Health Administration Over time 加班 On Time Delivery 准时交货 Org. to Org. Request

OTS OTW P/n PC & L PCA PCB PCI PE

On Time Ship Over the Wave Part Number Production Control and Logistics Printed Circuit Assembly Printed Circuit Board Peripheral Component Interface Production Engineer; Process Engineer; Project Engineer Process Engineering 工艺工程部(师) Permissible Exposure Limit Process Failure Mode and Effect Analysis 过程失效模式及后果分析 Pre-Functional Test Assembly Process Good Inventory (direct sale) Physical Inventory Plastic Leaded Chip Carrier Purchase Leverage System Parts List Verification

PE PEL PFMEA PFTA PGI PI PLCC PLS PLV

PO POD

Purchase Order or Process Optimization     定 单 /工艺优化 Proof Of Delivery

POKA-YOKE POL POST PP PP1 PPAP PPE PPV

Mistake Proofing 防错

Power on Self Test Production Planner or Pulse Pairing Pre-Production Run 1 Production Part Approval Process 生产件批准程序 Personal Protective Equipment Purchase Price Variance

PRWS PSA PTF

Pre-wash Pre-Ship Audit Platform tray feeder

PTH PVT PWA PWB PWSH QBR QC QE QFD QFD QFP QN

Plated through hole Process Verification Test Printed Wiring Assembly Printed Wiring Board Pre-wash Quarterly Business Review Quality Control Quality Engineer Quality Function Deployment Quality Function Deployment 质量功能展开 Quad Flat Pack Quality Notification Quality System Requirement 质量体系要求 Quality, teamwork, empowerment, continuous improvement Research and Development 研发/开发部 Random Access Matrix Tray Feeder Resource Expenditure Quote Request For Quotation 报价需求 Receive Inspection 收料检查 Receiving Inspection Report

QSR QTEC

R&D /RD RAMTF REQ RFQ RI

RIR

RMA

Return Materials Authorization

RMA RPC RTC RTV

Rosin Mildly Activated Returned Production Components Return To Customer Return To Vendor

SAF SAP SCSI SED SIS SLI SMCI

Sub-Assembly Forecast Systems, Application & Products Small Computer Systems Interface Shipper’s Export Declaration Supplier Information System Shipper’s Letter of Instruction Supplier Managed Consigned Inventory

SMD SME

Surface Mount Device 表面贴装设备 Subject Material Expert

SMI

Supplier Managed Inventory

SMT SNT

Surface Mount Technology 表面贴装技术 System Network Test

SO SOIC SOJ SOT SPB SPC

Sales Order 销售定单 Small Outline Integrated Circuit Small Outline package with J leads Small Outline Transistor Seconds per Board Statistical Process Control 统计过程控制

SPV SQE SSD

Sales Price Variance Supplier Quality Engineer Solid State Device

SVS TAB

Synthetic Vision System Tape Automated Bonding

TARS TE

Test Analysis and Repair System Test Engineer 测试工程师 Test Engineering 测试工程部 Threshold Limit Value Total Quality Management 全员质量管理 Technology/Quality/Responsiveness/Delivery/Cost/ Environment Top Side Quality Control Upper Control Limit 上控制限 Vendor Accounts Managers Voltage Constant Current Vertical Component Device Video graphic analyzer Vendor Managed Inventory Visual Mechanical Inspection 可视检查 Volatile Organic Compounds Vendor Quality Assurance 供应商质量保证 Wide Area Network 广域网络 Work In Process 在制品

TE TLV TQM TQRDCE TSQC UCL VAMs VCC VCD VGA VMI VMI VOC VQA WAN WIP

X(—)--R ZRE ZROH

Average-Range Chart 均值一极差图

explanation (解释)   解释 解释)
SAP programming language.

Remark (注释) 注释)

List of manufactures who have been approved to supply certain materials

Automated visual inspection tool using angled cameras

Systems to provide enhanced "what if?" analysis (providing simulation and impact analysis) using existing ERP data.

List of vendors (suppliers) approved to supply materials to Jabil. Component with terminations on one face in the form of a matrix array of solder balls. List of all components and materials, which make up the finished product.

Runs live traffic through the interface over the network

When there is an issue with the performance of a supplier, material, shipper etc, there is a procedure that is to be followed. Team established to work on resolving CARs

Computerized system for reporting and tracking faults found at visual inspection stages. Web based system allowing customers to view and update customer information (interfaces with DR to compile customer forecast info').

Component assembly technology where unpackaged silicon die is mounted directly on the PCB.

Capacitor C

UK health and safety legislation concerning hazardous materials

Comprises a letter that identifies the type of component, followed by a number that identifies its location on the PCB Ensures that enough capacity is available to meet the planned production

Picture tube in a television and in a computer monitor Term used for certain customer contacts at Cisco. 9 week check of material availability to support an MPS Outlook on material availability to support planned orders.

Jabil metric based performance-measuring system.

Producing final product and supplying direct to our customer's customer. Products designed to be easy to manufacture (minimise variety of materials, avoid materials wastage, reduce number of components, design for simple assembly).

Products designed to ease the sourcing of components

Can mean design for excellence or design for anything. Latter means designed with manufacture, test, environmental, health and safety, etc. in mind. Daily build targets for Cisco

digital linear tape system (hard drives, tape automation, data storage) Product which does not work when the customer receives it (Cisco term)

Observed defects/total production in the period x 1,000,000 Opportunities include not just the parts themselves, but every solder connection on an assembly; for example, on a board that has 500 parts, there may be 4500 opportunities to have a defect Scalable supply chain sizing and production planning methodology, which ensures product is always available to customer. Parts, which can be, accepted straight into stock without passing through Receive Inspection. Customer changes the technical specifications of the requested product.

工程更改通知

Method of exchanging business data, used in various ordering and inventory systems e.g. JIT, SMI and SMCI

Part of Manufacturing Engineering function responsible for control of BOMs, AVLs, line documentation, ECNs, etc.

equal employment opportunity Actual number achieved vs. target, or goal number established by engineering; the target number is based on (60 min./hour) * (cycle time (seconds)/unit) of the product = number of target units per hour

ERP software systems include SAP, BPCS, Magnus etc.

Heel straps and/or wrist straps are worn to prevent damage to components and boards due to ESD

An oven which heats the PCA’s to extreme usage temperatures to check performance, to desiccate moisture-sensitive components, and to bake pad/trace repairs

全尺寸检测报告

Metric used for Cisco products. Inventory of finished goods, owned by Jabil awaiting shipment to customer. May be in external hub or stored at customers site. Consuming the oldest inventory first.

The number of finished units in a group that pass inspection tests at each process point, w/o any rework, expressed in terms of a percentage of the group. All of the machines, the pace line, second manual, ICT, FVT, and OBA have each have their own FPY which are included in the shift report

A Ping test using real network traffic

 

Label generated for each delivery at Receiving - includes part no., quantity, material group, brief description, and for consigned goods a vendor code Surface mount placement machine - generally used for placing larger more difficult to place components Uses vibration and heat to test boards

Material with a high value and so is under tighter control and security.

UK health and safety body Surface mount placement machine - generally used for placing smaller, easier to place components

Member of the Inventory control team. A device in which all of the components of an electrical circuit are fabricated in a single chip.

Used to test the flow of current throughout the board to identify shorts and defective electrical components

Enterprise resource program largely replaced in Jabil by SAP

Organization which prepares standards and guidelines for e.g. soldering, inspection and quality of PCBs

Process for reducing inventory, by receiving goods only when they are needed Computer network in a particular site or building.

Term used in SPC Inventory control method where most recent stock is consumed first

A surface mount device, usually a resistor or diode of tubular shape

% available improvement is derived from this

The minimum amount that can be ordered from a vendor at one time.

Responsible for compiling materials quotation, member of purchasing team. Inventory of defective products, machine attrition etc. Depending on the condition of the part/board it may be repaired or written off. Material classification for all non production materials Procedure for planning the production and purchase of all materials required by the MPS

The process of launching production of a new product Generally equipment customized for the manufacturing process for a particular customer. Also called PSA, or pre-ship audit, is the final step before a box leaves the facility…a statistically determined number of boxes (sample size) is randomly opened and fully inspected to ensure the highest quality Jabil's customers Simulates aging of board US health and safety body

Measure of the amount of finished product delivered to customer on schedule Term used for purchasing material for Cisco DF. Cisco DF metric Describes product post-wave solder

Another term for PCB

Allows company spend to be aggregated over for all sites. Bar code system used to ensure correct parts are loaded in correct feeders on the component placement machines.

Stock comprising hazardous chemicals.

production planner, or pulse pairing

The difference between the standard cost on the system for what Jabil pays for a specific part and the invoiced price.

Visual inspection prior to shipment (see OBA) GSM side mounted part-to-tray placement machine; tray matrix machine used to load parts from Nitrogen desiccation tank plated-through hole

Another term for PCB

This is an integrated circuit (IC) component Quality notification in SAP is equivalent to RIR in Impcon

Alternative presentation method on GSM placement machines Sent to suppliers to request a pricing quotation for materials Location is stores where incoming goods are inspected. Identifies and dispositions material

Returned material from a customer comes back to xxx or one of two reasons…it might be a manufacturing fault that is considered a debit, or it might be a requested upgrade that is considered a consignment (profit source) Type of flux

Materials returned to the supplier, this could be for several reasons i.e. defective, wrong parts/quantities etc Computerized purchase, planning, inventory and production ERP system. parallel port Application, which allows suppliers to access PO and MRP, forecast information. Inventory stored in-house by Jabil which is owned by the supplier until pulled from stores.

Provides assistance and backup on issues relating to expertises, Commonly SAP system.

The supplier is given a range of how many parts to stock on hand

A board is tested to see if it can communicate with another board over network traffic

Used to calculate BPH Real time data recorded by operators and used to highlight immediately if the process is going out of control. In the case of the later, the data is evaluated by Quality Analysts to determine the problems and to start immediate corrective action

Liases with vendor on quality issues, also involved in vendor assessments. solid state device

Used to monitor paste height for surface mount technology The process of interconnecting the integrated circuit die to the board using a fine lead frame supported by a Kapton tape. Computerized system used to track electrical and functional faults on a board.

Used in SPC

High-priced chip that goes on PCBs Material positioned at a 3rd party hub location for delivery to plant.

Computer network extending beyond the local site Material currently showing on system as being issued to the line, but not yet consumed in a backflush.

Reversal of a backflush in SAP Short for a c-class component in SAP Connector CN, CONN, J, P Crystal Y Diode D, Z, CR, VR Fuse F Inductors L Integrated circuit IC, U, E Oscillator OSU Relay RL, K Resistor R Resistor/network RN Resistor/package RP Transistor Q

Switches S, SW


相关文章:
职位的英文缩写及中文全称.doc
职位的英文缩写及中文全称 - 品质人员名称类 QC quality contro
英文缩写,全称.xls
英文缩写,全称 - abbreviation (缩写) abbreviate f
英文缩写,全称.xls
英文缩写,全称 - abbreviation (缩写) abbreviate f
通用英文缩写的全称.ppt
通用英文缩写全称 - Acronym AA ABIW ACC AD ADE A
最全的单片机专业术语英文缩写全称.doc
最全的单片机专业术语英文缩写全称_计算机软件及应用_IT/计算机_专业资料。终于找到了 最全的单片机专业术语英文缩写全称 MCS-51 指令 (1)数据传送类指令(7 种助...
中国各大银行的英文缩写及全称.doc
中国各大银行的英文缩写全称 - 中国各大银行的英文缩写全称 中国人民银行 P
英文缩写 英全名 中文名.doc
英文缩写全名 中文名_材料科学_工程科技_专业资料。英文缩写全名 中文名
疫苗英文缩写&全称.doc
疫苗英文缩写&全称 - 疫苗英文缩写&全称 疫苗英文缩写全称 卡介苗 BCG(Bacille Calmette-Guerin vaccine) 轮状病毒疫苗 Rota (Rotavirus ...
各种游戏类型英文简称、全称大全.doc
各种游戏类型英文简称全称大全 - 游戏类型 游戏类型主要分为: ACT、 FT
英文期刊缩写与全称对照.pdf
英文期刊缩写全称对照 - 如有意见或建议请发送邮件至 editor@cailiaoren.com SCI|科研必备:英文期刊缩写全称对照 A Acc. Chem. Res. ACH - M...
机械英文缩写和全称对照表.doc
机械英文缩写全称对照表 - ACCESS Accessory 附件 ADJ A
塑料英文简称 英文全称 中文全称.doc
英文简称 英文全称 中文全称 ABS Acrylonitrile-butadie
电厂常用英文缩写及全称.pdf
电厂常用英文缩写全称 - B-MCR:锅炉最大连续蒸发量 B-ECR:锅炉最经
单片机缩写的英文全称及中文名称.doc
单片机缩写英文全称及中文名称 - 单片机缩写英文全称及中文名称 PC = p
51单片机英文缩写全称.pdf
51单片机英文缩写全称 - MCS-51 指令 ( 1 )数据传送类指令( 助记
英文简称英文全称中文解释_图文.ppt
英文简称: ACF 英文全称: Anisotropic Conductive Film 中文全称: 各向异性导电薄膜 英文简称: CCD 英文全称...
英文全称.doc
英文全称 - 英文全称 缩写 中文 Abstracts Abstr 文摘 Abb
单片机常用英文缩写全称.doc
单片机常用英文缩写全称 - 学习单片机时难免有不少简写不认识,造成在阅读文章时不
电子厂职位英文缩写及全称.txt
电子厂职位英文缩写全称 - 品质人员名称类 QC quality contro
电厂常用英文缩写及全称.doc
电厂常用英文缩写全称 - BMCR:锅炉最大连续蒸发量 Boiler maxi