当前位置:首页 >> 其它 >>

Final inspection report May 5th


Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 1 of 30

I. GENERAL INFORMATION Client: Kfar Menachem Metal Works Product Description: bolts and nuts Brand name P.O. No.: 51511 Item No.: See below Destination Country: Israel Service Performed: Pre-shipment inspection Inspection Date: 2012-5-5 Supplier: Ningbo Garyherd Import Export Factory: Longding fastener Inspection Location: Ningbo Inspector: Chen Yongyin
Total order quantity Sample size 360,000 pcs

800 pcs

ORDER INFORMATION
NO # Product description 43-330840 M 8X40 DIN 933 FEUERZINKT, 8.8 43-330845 M 8X45 DIN 933 FEUERZINKT, 8.8 43-330850 M 8X50 DIN 933 43-331040 M10X40 DIN 933 43-331050 M10X50 DIN 933 43-331060 M10X60 DIN 933 FEUERZINKT, 8.8 44-3-108 M 8 DIN 934 FEUERZINKT, 8 44-3-110 M10 DIN 934 GRADE 8 QTY Sample size 100 100 100 100 100 100 100 100 800

1. 2. 3. 4. 5. 6. 7. 8.

40,000 80,000 40,000 30,000 40,000 20,000 100,000 20,000
370,000

II. INSPECTION SUMMARY
Passed A. Quantity B. Product Description III. Workmanship Failed Pending N.A. Remark* The shipping quantity was different from PO requirement. Details refer to Section A. Beyond AQL 1. The factory did not allow us to do drop test. 2. Carton weight was out of 10kg, details refer to section E. 3 The factory could not provide equipment for strength test during inspection. 4, Thread quality, the test was fail. No tolerance was provided, details refer to section D.

√ ? √

C. On-site tests



D. Specification



Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 2 of 30

E. Packing F. Marking & Label

? √
The sticker on the carton & pallet was in Chinese and English. 1, The factory couldn’t provide the Raw material documents for us check during this inspection. 2, The factory could not provide equipment for strength test during inspection.

G. Customer requests



* Refer to Part III

III. WORKMANSHIP Inspection standard: ANSI/ASQ Z1.4
Sampling Plan: Normal, Single Description from critical to minor per item see below Critical: Major: Minor:

AQL 0 1.0 4.0

Total found: 0 7 10 Cr Sample size: 100 Total found: Accepted: Result: 0 0

Result

Failed
Ma 0 2 Passed 1 1 2 Passed 1 1 2 Passed 0 2 Passed 2 2 2 Passed 0 7 2 2 7 0 7 2 0 2 7 Mi 3 3 7

Workmanship Defectives / Function Inspection Findings Description From Critical to Minor For Item: M 8X40 DIN 933 1 Color stained on unit

For Item: M 8X45 DIN 933 1 2 Color stained on unit Abrade of thread

Sample size: 100

Total found: Accepted: Result: For Item: M 8X50 DIN 933 1 Abrade of thread Total found: Accepted: Result: For Item: M10X40 DIN 933 1 Color stained Total found: Accepted: Result: For Item: M10X50 DIN 933 1 Painting peeled off Total found: Accepted: Result: Sample size:100 Sample size: 100 Sample size: 100

0 0

0 0

0 0

0 0

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 3 of 30

For Item: M10X60 DIN 933 1 Color stained

Sample size: 100 Total found: Accepted: Result: 0 0 0 2 Passed Total found: Accepted: Result: 0 0 0 2 Passed Total found: Accepted: Result: 0 0 3 3 2 Failed 0 7 2 2 7 1 1 7

For Item: M 8 DIN 934 1 unsmooth of unit

Sample size: 100

For Item: M10 DIN 934 1 Painting peeled off

Sample size: 100

Remark:

NIL

Note: A Defective is defined as a unit of product that contains one or more defects. A Defect is defined as any non-conformance of the inspected unit of product with specified requirements. A single defect is taken into account per each defective unit; only one most serious defect is taken into account per each defective unit.
CPE

Defect-Painting peeled off-M 10X50 DIN 933-ma (1)

Defect-Abrade of thread-M 8X45 DIN933-ma

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 4 of 30

Defect-Abrade of thread-M 8X50 DIN 933-ma

Defect-Color stained on unit-M 8X40 DIN 933-mi (1)

Defect-Color stained on unit-M 8X40 DIN 933-mi (2)

Defect-Color stained on unit-M 8X40 DIN 933-mi (3)

Defect-Color stained on unit-M 8X45 DIN 933-mi (1)

Defect-Color stained on unit-M 8X45 DIN 933-mi (2)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 5 of 30

Defect-Color stained-M 10X40 DIN 933-mi (1)

Defect-Color stained-M 10X40 DIN 933-mi (2)

Defect-Color stained-M 10X60 DIN 933-mi

Defect-Painting peeled off-M 10X50 DIN 933-ma

Defect-Painting peeled off-M10 DIN 934 (1)

Defect-Painting peeled off-M10 DIN 934 (2)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 6 of 30

Defect-Painting peeled off-M10 DIN 934 (3)

Defect-unsmooth of unit-M8 DIN934-mi (1)

Nil

Defect-unsmooth of unit-M8 DIN934-mi (2) V. CONCLUSION

Failed
Approved by:
Note: 1. this report reflects our findings at the time and the place of inspection based on random samples selected. 2. This inspection was carried out to the best of our knowledge and abilities, and our responsibility is limited to the exercise of reasonable one. 3. This report does not relieve the sellers from their contractual obligations nor does it prejudice buyer ’s right for compensation for any apparent and/or hidden defects not detected during our inspection or occurring thereafter. 4. This report does not evidence shipment. 5. Our services are subject to the General Conditions of Service of our company, which is shown at our contract and can be sent to you upon written request. Please find our inspection details from next page (Section A – F).

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 7 of 30

A. QUANTITY
Quantity P.O. Item M 8X40 M 8X45 M 8X50 M10X40 M10X50 M10X60 M8 M10 Total: Selected Cantons : 16 Cartons were selected randomly on site. No carton number/serial. number was found. Serial No.: Result: Remark: Pending The shipping quantity was different from PO requirement. Details refer to Section A. Order Qty 40,000 80,000 40,000 30,000 40,000 20,000 100,000 20,000 37,0000 Qty / Carton 1600 /674 1600 /1057 1600 /313 800/580 800/715 600/300 6000/45 00/3700 3200 /800 Cartons 19 50 25 39 51 34 20 6 244 Quantity Breakdown Packed 29474 79457 40313 30980 40715 20100 116200 20000 37,7239 Unpacked 0 0 0 0 0 0 0 0 0 Unfinished 0 0 0 0 0 0 0 0 0 Packed 100 100 100 100 100 100 100 100 800 Unit: pcs Sample Size Unpacked 0 0 0 0 0 0 0 0 0

C. ON SITE TESTS
Description Method For screws: Check: key width (critical), length, thread length, head thickness. For nuts: Check: key width (critical), thickness (height). Note: measurement and tolerances according to the relevant DIN. (For screws – DIN 933, for nuts DIN 934.) Use go/no-go gauges to check. Take photos. The screw should fit the nut in a way that it won't be too loose or too tight. Take photos. Sample Size Result / Reading

1.

Product measurement check

5 of each item

Passed Refer to section D

2. 3.

Thread quality Fit to nut

5 of each item 5 of each item

Failed Passed M 8X40: 18.392kg for all M 8X45: 19.930kg for all M 8X50: 21.725kg for all M10X40:31.655, 31.670,31,662kg M10X50:36.780, 36.788,36.792kg M10X60:42.340, 42.344,42.354kg M 8 : 4.733, 4.772,4.782kg M10: 10.165, 10.210,10.167kg

4.

Weight (KG/1000PCS)

Actual finding. Take photos.

3 measuremen ts for each item

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 8 of 30

5.

Torque moment

Run torque moment test, using torque key. Actual finding. Take photos. (take samples for testing in the office)

Actual findings: torque moment 6. 7. 8. Hardness test Strength test Head mark Actual finding. Take photos. Actual finding. Take photos.

Item no. M8 M10

9.

Corrosion Resistance

10. Carving

11. Visual check

12. Luster 13. Carton weight

Actual finding. Take photos. Corrosion products of zinc nor basis metal corrosion products at the end of the test periods are not allowed. The appearance of corrosion products when examined with 20/20 eyesight at normal reading distance shall be cause for rejection, except that white corrosion products 6 mm or less from the edges of specimens shall not constitute failure. Defects, holes, dints are not allowed in the carving of the screw. Plain surface. No scratches, no nick, no bents, no sharp edges. Check clean welds' white with no stains. No defects- pits, roughness, nodules, burning, cracks. Bright, semi-bright or dull finish shall be acceptable. Carton weight should be no more then 10kg

The manufactory did not provide facility to perform this test. So we took 10pcs/item 10 of each samples to office. item And the test result was updated later. See actual findings below Moment the test failed [N.M] 22.5,30,25,35,25,27.5,30,32.5,27.5,22.5, 52.5,>60,55,50,52.5,55,45,57.5,>60,>60, Passed 3 of each 23~26HRC item Pending 3 of each The factory could not item provide equipment. Passed

All samples

Passed

All samples

Passed

All samples

Passed

All samples

Passed Pending
On-SITE TESTS END

0

Result: Failed 1. The factory did not allow us to do drop test. 2. Carton weight was out of 10kg, details refer to section E. Remark: 3 The factory could not provide equipment for strength test during inspection. 4, For Torque moment test: Taken actual findings. 5, Thread quality, the test was fail.

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 9 of 30

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 10 of 30

D. PRODUCT SPECIFICATION (d×L×s×k× Item Client’s 1# sample e)/ Spec. (d×s×m)
M 8X40 8x40x13x5.3 x14.38 d: 7.98 L: 39.75 s: 12.92 k: 5.46 e: 14.62 d: 7.96 L: 44.72 s: 12.88 k: 5.44 e: 14.65 d: 7.88 L: 49.82 s: 12.94 k: 5.44 e: 14.62 d: 9.93 L: 39.68 s: 16.96 k: 6.52 e: 19.32 d: 9.82 L: 49.60 s: 16.96 k: 6.56 e: 19.18 d: 9.94 L: 59.72 s: 16.90 k: 6.54 e: 19.20 s:12.98 m:6.72 s:16.96 m:7.96

2# sample d: 7.94 L: 39.74 s: 12.94 k: 5.44 e:14.62 d: 7.94 L: 44.73 s: 12.96 k: 5.44 e:14.61 d: 7.98 L: 49.82 s: 12.94 k: 5.38 e:14.62 d: 9.94 L: 39.70 s: 16.88 k: 6.52 e:19.17 d: 9.90 L: 49.65 s: 16.96 k: 6.54 e:19.20 d: 9.96 L: 59.75 s: 16.97 k: 6.60 e:19.20 s:12.99 m:6.76 s:16.90 m:7.94

3# sample d: 7.96 L: 39.72 s: 12.96 k: 5.40 e:14.60 d: 7.93 L: 44.70 s: 12.88 k: 5.40 e:14.58 d: 7.92 L: 49.76 s: 12.96 k: 5.40 e:14.63 d: 9.90 L: 39.72 s: 16.94 k: 6.50 e:19.22 d: 9.86 L: 49.60 s: 16.92 k: 6.54 e:19.18 d: 9.98 L: 59.74 s: 16.96 k: 6.68 e:19.16 s:12.98 m:6.76 s:16.94 m:7.96

4# sample d: 7.96 L: 39.72 s: 12.94 k: 5.42 e:14.62 d: 7.94 L: 44.70 s: 12.92 k: 5.42 e:14.56 d: 7.98 L: 49.98 s: 12.98 k: 5.42 e:14.63 d: 9.92 L: 39.70 s: 16.96 k: 6.52 e:19.24 d: 9.90 L: 49.66 s: 16.94 k: 6.54 e:19.20 d: 9.96 L: 59.74 s: 16.96 k: 6.64 e:19.16 s:12.98 m:6.74 s:16.98 m:7.94

5# sample d: 7.94 L: 39.74 s: 12.96 k: 5.44 e:14.60 d: 7.96 L: 44.72 s: 12.96 k: 5.44 e:14.58 d: 7.96 L: 49.94 s: 12.96 k: 5.44 e:14.62 d: 9.94 L: 37.72 s: 16.98 k: 6.52 e:19.22 d: 9.90 L: 49.68 s: 16.96 k: 6.56 e:19.18 d: 9.94 L: 59.76 s: 16.96 k: 6.66 e:19.16 s:12.99 m:6.76 s:16.96 m:7.96

Net Weight

18.4g for all

M 8X45

8x45x13x5.3 x14.38

20.0g for all

M 8X50

8x50x13x5.3 x14.38

21.8g for all

M10X40

10x40x17x6. 4x18.9

31.8g for all

M10X50

10x50x17x6. 4x18.9

36.3g for all

M10X60

10x60x17x6. 4x18.9

42.4g for all

M8 M10 Result: Remark:

13x6.5 17x8 Pending

4.7g for all 10.2g for all result

No tolerance was provided, details refer to section D.

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 11 of 30

E. PACKING
Package Details Item No. M 8X40 M 8X45 M 8X50 M10X40 M10X50 M10X60 M8 M10 Qty / Carton Marking 1600 1600 1600 800 800 600 6000 3200 New or Used Fastening Metal Staples Material Packing Method 1 Units were packing into a big poly bag. 2 A poly packed into an inner box. 3 4 inner boxes were packing into 5-ply carton. Assortment Method -Result: Remark: Passed Nil Actual 1600 1600 1600 800 800 600 6000 3200 New Yes Cardboard Carton Size L×W ×H (mm) Marking Actual 375x280x155 375x280x155 375x275x160 380x270x160 380x275x155 375x275x160 383x270x160 381x272x164 Gross Weight (KG) Marking Actual Nylon Band Corrugated Paper Plies 29.969 32.484 35.464 25.897 29.978 25.989 28.984 33.157 No 5-ply Qty / Inner Marking 400 400 400 200 200 150 1500 800 Actual 400 400 400 200 200 150 1500 800

Export Carton Details

F. Marking & Labeling
Barcode Verification Location Master carton Barcode and product Master carton Serial no. and product Labeling/Printing Name Importer on the carton Sticker Sticker on Yes. the carton Sticker on Yes. the Pallet Shipping Marks Shipping Marks (on 1 side) Side Marks (on 0 side) Inner Box Marks (on 1 side) Item Visual/Spec. Reading Sample size Passed Failed -

Location

Result N/A Pending Pending Actual founding N/A Actual founding

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 12 of 30

Result: Remark:

Pending The sticker on the carton & pallet was in Chinese and English. Details refer to below photo;

G. Customer requests
Client Requirements 1. 2. 3. Raw material documents. Take samples for running torque moment test in the office, take photo of the result report (including the results for all samples tested). Take photos of on-site tests including measurements check, weight, hardness, strength etc… Pending 1,The factory couldn’t provide the Raw material documents for us check during this inspection. 2, The factory could not provide equipment for strength test during inspection. Result Pending The test result was updated later. Pending

Result: Remark:

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 13 of 30

PHOTO ATTACHMENT
Item DIN933 M10X40

Item DIN933 M10X40 (1)

Item DIN933 M10X40 (10)

Item DIN933 M10X40 (2)

Item DIN933 M10X40 (3)

Item DIN933 M10X40 (4)

Item DIN933 M10X40 (5)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 14 of 30

Item DIN933 M10X40 (6)

Item DIN933 M10X40 (7)

Item DIN933 M10X40 (8) Item DIN933 M10X50

Item DIN933 M10X40 (9)

Item DIN933 M10X50 (1)

Item DIN933 M10X50 (10)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 15 of 30

Item DIN933 M10X50 (2)

Item DIN933 M10X50 (3)

Item DIN933 M10X50 (4)

Item DIN933 M10X50 (5)

Item DIN933 M10X50 (6)

Item DIN933 M10X50 (7)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 16 of 30

Item DIN933 M10X50 (8) Item DIN933 M10X60

Item DIN933 M10X50 (9)

Item DIN933 M10X60 (1)

Item DIN933 M10X60 (10)

Item DIN933 M10X60 (2)

Item DIN933 M10X60 (3)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 17 of 30

Item DIN933 M10X60 (4)

Item DIN933 M10X60 (5)

Item DIN933 M10X60 (6)

Item DIN933 M10X60 (7)

Item DIN933 M10X60 (8)

Item DIN933 M10X60 (9)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 18 of 30

Item DIN933 M8X40

Item DIN933 M8X40 (1)

Item DIN933 M8X40 (10)

Item DIN933 M8X40 (2)

Item DIN933 M8X40 (3)

Item DIN933 M8X40 (4)

Item DIN933 M8X40 (5)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 19 of 30

Item DIN933 M8X40 (6)

Item DIN933 M8X40 (7)

Item DIN933 M8X40 (8) Item DIN933 M8X45

Item DIN933 M8X40 (9)

Item DIN933 M8X45 (1)

Item DIN933 M8X45 (10)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 20 of 30

Item DIN933 M8X45 (2)

Item DIN933 M8X45 (3)

Item DIN933 M8X45 (4)

Item DIN933 M8X45 (5)

Item DIN933 M8X45 (6)

Item DIN933 M8X45 (7)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 21 of 30

Item DIN933 M8X45 (8) Item DIN933 M8X50

Item DIN933 M8X45 (9)

Item DIN933 M8X50 (1)

Item DIN933 M8X50 (2)

Item DIN933 M8X50 (3)

Item DIN933 M8X50 (4)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 22 of 30

Item DIN933 M8X50 (5)

Item DIN933 M8X50 (6)

Item DIN933 M8X50 (7)

Item DIN933 M8X50 (8)

Item DIN933 M8X50 (9)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 23 of 30

Item DIN934 M10

Item DIN934 M10 (1)

Item DIN934 M10 (2)

Item DIN934 M10 (3)

Item DIN934 M10 (4)

Item DIN934 M10 (5)

Item DIN934 M10 (6)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 24 of 30

Item DIN934 M10 (7)

Item DIN934 M10 (8)

Item DIN934 M10 (9) Item DIN934 M8

Item DIN934 M8 (1)

Item DIN934 M8 (2)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 25 of 30

Item DIN934 M8 (3)

Item DIN934 M8 (4)

Item DIN934 M8 (5)

Item DIN934 M8 (6)

Item DIN934 M8 (7)

Item DIN934 M8 (8)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 26 of 30

Item DIN934 M8 (9) Test

factory

warehouse

label on pallet

Fit to nut

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 27 of 30

Thread quality test (1)

Thread quality test (2)

Thread quality test (3)

measurement (1)

measurement (3)

measurement (4)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 28 of 30

measurement (7)

measurement (2)

measurement (5)

measurement (6)

hardness test (1)

hardness test (2)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 29 of 30

Torque moment test (1)

Torque moment test (2)

Torque moment test (3)

Torque moment test (4)

Torque moment test (5)

Torque moment test (6)

Client:

KMMW 2012-5-5 H-12041483 (F083293)

Conclusion

INSPECTION REPORT

Report Date: Inspection No.: Form No.:

Failed
Page 30 of 30

Nil.

Torque moment test (7)

PE

***********************************************

This is The End of the Report

*******************************************

Note: 1. This report reflects our findings at the time and the place of inspection based on random samples selected. 2. This inspection was carried out to the best of our knowledge and abilities, and our responsibility is limited to the exercise of reasonable one. 3. This report does not relieve the sellers from their contractual obligations nor does it prejudice buyer ’s right for compensation for any apparent and/or hidden defects not detected during our inspection or occurring thereafter. 4. This report does not evidence shipment. 5. Our services are subject to the General Conditions of Service of My-Com, which is shown at our website and can be sent to you upon written request.


相关文章:
Final Inspection Guideline-rev1 - C&amp
If defect is found in either functional, visual or measurement should be reported in the Final Inspection Report and Measurement Audit Report. If needed, ...
Final Random Inspection Report for DVD Player
Final Random Inspection Report for DVD Player_计算机软件及应用_IT/计算机_专业资料。DVD blank reportFinal Random Inspection Report for DVD Player Inspector Nam...
IP01-B Final Inspection Protocol - GeneralProduct
Final inspection report ... 30页 免费 final inspection form 1页 1财富值 ...IP-01-B May-12-2003 2 Inspection Final Random Inspection - 100% of the...
Inspection report 18.5' LED
18- FW1124-1204S Final ... 暂无评价 1页 免费...INSPECTION REPORT Manufactuer: Brand: Buyer: A.Q...5th Inspection Date: 2011-5-11 P.O.NO: ( )...
服装Q.C跟单手册
c) The Factory Manager should receive a copy of the Inspection Report and...c) Final Inspection of Garments may begin when at least 80% of finished ...
服装QC看货手册
c) The Factory Manager should receive a copy of the Inspection Report and...c) Final Inspection of Garments may begin when at least 80% of finished ...
Sample Inspection Report
XXXX 邮编: 网址: Fax:0086-21- Sample Inspection Report Customer Part No....3 4 5 FINAL Inspection REMARKS: PASSED √ FAILED Inspection By: Check By...
TEM4时事0811-0903
This judgement is final judgement. (relevant report see 2008 the first, 2...Central Commission for Discipline Inspection of the CPC is held in Beijing....
应用文写作参考范文
On 5th October I bought one of your expensive ...control department for inspection and a report. Meanwhile...I hope I may be granted an interview when ...
810句对照WORD
5th. 早上 10 点半有班机. There's a ten ...Check it to my final destination 最迟要在 8 ...All products have to pass strict inspection before...
更多相关标签: