当前位置:首页 >> 机械/仪表 >>

Final Inspection Report


Client: Inspection #: Report Date: Page:

Tradeka
Page 1 of 4

FINAL INSPECTION REPORT
Client Contact & Tel Supplier Contact Tel

Tradeka

Factory Contact & Tel Inspectors
Davies

Section1: General Information
Service Performed Buyer P.O.# Final Random Inspection Inspection Place Country of Origin Inspection date

CHINA

Sealed Sample#

Not Available NA NA NA NA NA NA

Check Item
Product Name Item Code# Order Quantities
Lot Size Packed Quantity Sample size/Ctns

Style No.

Pcs

Ctns

Pcs

Ctns

Pcs

Ctns

Pcs

Ctns

Pcs

Ctns

Pcs

Ctns

Product Section2: Product Description Check Item Style No.
Colour Dimension: Material, Components: Label & Other

Material: 1. Plastic: 2. Steel: Material: 1. Plastic: 2. Steel:
NA NA NA NA

1. Age limit: Refer to Fig. 2. Label required: Refer to Fig. 1. Age limit: Refer to Fig. 2. Label required: Refer to Fig. NA

EANSection3: Shipping Mark & EAN-Code & Packing Check Item Style No.
Shipping Mark 1. Main mark: Result: Refer to Fig. 2. Side mark: Result: Refer to Fig. 1. Main mark: Result: Refer to Fig. 2. Side mark: Result: Refer to Fig. EAN-Code 1. Visuall: 2. Scanned: Result: Packing

Measurement

Material & Method&Other

1. Visuall: 2. Scanned: Result:

1set packed inside a retail box together with adorning parts and instruction sheet. 4Pcs packed into a master carton. Printed 7 languages on retail box. With paper board box were used to protect the goods against break.

Client: Inspection #: Report Date: Page:

Tradeka
Page 2 of 4

Mil2859BSSection4: Mil-Std 105E / ISO 2859-1:1999 / BS-6001/ ANSI / ASQC Z1.3
NA
AQL Max Permitted Actual Found Result Cr 0 Maj 1.5 Min 4.0 Cr 0 Maj 1.5 Min 4.0 Cr 0 Maj 1.5 Min 4.0 Cr NA NA Maj NA Min NA Cr NA NA Maj NA Min NA

0 0

0 0

0 0

NA NA

NA NA NA

NA NA

NA NA

NA NA NA

NA NA

Section5 Section5: Workmanship Appearance & Function Findings: Defects Description Item#
1. 2. ---- Fig. ---- Fig.

Total 1. 2. ---- Fig. ---- Fig.

Cr 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Major

Minor

Total

Total

Section 6 : Safety & Functional Tests
Note: The following tests were performed on General inspection Level II and special inspection level S-3 during inspection.

Result Test Item
6.1. Carton Drop Test 6.2.Product Drop Test 6.3.Small parts

Sample Size
1Ctns*2

Comments
The carton is dropped on 1base 1edge and 1 face. The drop height is 24in.

6.4. Tension & Torque 6.5.Impact&Compress 6.6. Accessibility check 6.7.Sharp edge &points 6.8.Static strength 6.9.Dynamic strength 6.10. Stability 6.11. Sound levels 6.12. Adhesion test 6.13. Working Check 6.14. Assemble & Disassemble Check

As per EN71-1:05 (Section 8.5) As per EN71-1:05 (Section 8.2) --- The requirement are applicable before and after abuse testing. As per EN71-1:05 (Section 8.3&8.4) As per EN71-1:05 (Section 8.7&8.8) As per EN71-1:05 (Section 8.10) As per EN71-1:05 (Section 8.11&8.12) As per EN71-1:05 (Section 8.21) As per EN71-1:05 (Section 8.22) As per EN71-1:05 (Section 8.23) As per EN71-1:05 (Section 8.28) Recode: LAeq: less than 80dB. 810# Tape As per instruction

As per instruction

Client: Inspection #: Report Date: Page:

Tradeka
Page 3 of 4

Section 7: Remarks (to be confirmed by client)
7.1 7.2 7.3 7.4 7.5 7.6

No approved sample received for inspection reference ---(Advise: Subject to client’s evaluation.)

Status Pending

Inspection Summary
Result Check list
1>Quantity 2> Material, Color &Label etc 3> Packing, Barcode&Mark 4> Appearance & Style 5> Function Check 6> Safety Test
Conformed Conformed Conformed

Pending

Pending

7>Reliability Test 8>Assemble & Disassemble Overall Resurt Due to Section Explanation of Result Due to Section Due Section to

NA NA NA NA NA NA NA NA NA NA NA

NA NA NA NA NA NA NA NA NA NA NA

Picture Information
Fig.1: Main mark Fig.2: Side mark

Fig.3:

Fig.4:

Fig.5: Fig.6: Ean-code Fig.7: Label from Tradeka

Fig.8: Important information from retail & Goods Fig.9: Test Picture

Tension

Strength & loading

Drop

Battery compartment

Adhesion

Defect Picture

Fig.10:

Fig.11:

Fig.12:

Fig.13:

Client: Inspection #: Report Date: Page:

Tradeka
Page 4 of 4

Fig.14:

Fig.15: Nil

Fig.16:

Remarks from the Factory Manager:

Inspector Signature :

Factory Representative Signature :

Buyer signature:


相关文章:
Inspection report
塗裝檢驗報告 Painting inspection report 5. 成品最終檢記錄 Product final check record 覆核 Approved by 檢驗 Inspection by 製作 Prepared by 自主檢查 SHOP ...
EA Inspection Report HZ 2013最新_图文
EA Inspection Report HZ 2013最新_法律资料_人文社科_专业资料。EA LIVING ...The shipment released would be based on the final inspection result of ...
shipment inspection report_图文
shipment inspection report_英语学习_外语学习_教育专区。T-Opto Report to: ... this shipment we have no time to do IPI, so the final UL label hasn...
2007-7-26Pre-Shipment Inspection Report Format
2007-7-26Pre-Shipment Inspection Report Format_生产/经营管理_经管营销_专业...一般只会重验二次 在中期 – Inline; 尾期 –Final; ETYT000XXX TRS: ...
外贸QC 检验报告格式
Final TPO During ______ % GZO SALES: S/C DATE: Re-inspection _______ INSPECTION DATE: SUPPLIER: SHIPPING DATE: REPORT REF. NO. : YES NO) ...
ILS校验报告1006版
Final 二号机/Tx.2 起始/Initial 最终/Final 第 4 页共 7 页 Page 4 of 7 版本号/version 10-06 飞行校验报告 Flight Inspection Report 报告编码/ Report...
site-inspection-report 现场检验报告 英文版
site-inspection-report 现场检验报告 英文版_英语学习_外语学习_教育专区。... Final inspection repor... 1032人阅读 10页 3下载券 AS 3894.10-2002 ...
inspection report
inspection report_英语学习_外语学习_教育专区。INSPECTION REPORT CUSTOMER DATA ...FINAL INSPECTION RE... 暂无评价 1页 免费 Dimensional Inspection... 暂无...
彩宝检验报告 INSPECTION REPORT(中英文对照)
彩宝检验报告 INSPECTION REPORT(中英文对照)_冶金/矿山/地质_工程科技_专业资料... Final inspection repor... 30页 1下载券 EA Inspection Report H... ...
QUALITY INSPECTION REPORT --- DHR-20A Dehydrator_图文
QUALITY INSPECTION REPORT --- DHR-20A Dehydrator_生产/经营管理_经管营销_... inspection report 2 2页 免费 Final inspection repor... 30页 免费 ...
更多相关标签: